Choose Calgary or Edmonton, select two local addresses and estimate a municipal taxi meter fare in Canadian dollars. Alberta does not have one province-wide taxi rate, and this independent informational calculator does not book a ride.
The Taxi Fare Calculator Alberta helps you estimate a metered taxi trip in Calgary or Edmonton before you travel. Select the correct city, enter a pickup point and destination, choose the fare basis shown in the calculator, and add any stopped or waiting time you expect. The result is displayed in Canadian dollars as an estimated range, not a guaranteed price.
To calculate a fare:
The Taxi Fare Calculator Alberta then uses the estimated road distance, the selected municipal rate and the waiting-time input to produce a fare range. Always confirm the rate with the taxi company or driver before starting the trip.
Alberta does not have one taxi tariff that applies to every city and town. Local rules and operator pricing can differ. This calculator currently supports the municipal taxi fare structures used in Calgary and Edmonton only. It does not estimate fares for Red Deer, Lethbridge, Fort McMurray, Medicine Hat, Banff, Jasper or other Alberta locations.
The calculator is designed for licensed taxis covered by the selected city rules. It is not a rideshare price checker and does not calculate limousine, private transportation provider or every app-booked fare.
The City of Calgary publishes a maximum regulated taxi meter rate for street hails and traditional phone-dispatch trips. A taxi company may charge less than this maximum. A trip booked through a City-approved app can use a different commercial rate, so the app price may not match a regulated meter estimate.
| Calgary fare component | Rate used by the calculator |
|---|---|
| Initial meter charge | CA$4.50 for the first 120 metres |
| Distance charge | CA$0.23 for each additional 120 metres |
| Slow or stopped travel | Time-based meter calculation applies below the distance-rate speed threshold |
| Regulated rate scope | Street hail and traditional phone dispatch |
The regulated distance rate applies when the taxi travels faster than 20.24 kilometres per hour. At lower speeds, including slow traffic or waiting, time affects the meter. The Taxi Fare Calculator Alberta uses your added waiting minutes to represent this part of the trip, but it cannot reproduce every second of a live meter.
The City of Edmonton sets fares for taxis and accessible taxis under Vehicle for Hire Bylaw 17400. Accessible taxis use the same fare structure and cannot add a higher charge for accessible service.
| Edmonton fare component | Street hail | Eligible pre-arranged taxi |
|---|---|---|
| First 135 metres | CA$4.10 | CA$3.50 |
| Each additional 135 metres | CA$0.25 | CA$0.25 |
| Each additional 24 seconds of waiting | CA$0.20 | CA$0.20 |
The lower initial amount applies when an Edmonton taxi is pre-arranged through an approved mobile app or a pre-existing written agreement. This does not mean every rideshare or private vehicle-for-hire trip follows the taxi meter table. The Taxi Fare Calculator Alberta applies the selected Edmonton taxi basis and the same published distance and waiting increments.
Airport trips may follow extra rules that do not apply to a normal city journey.
YYC publishes a taxi access fee of CA$5.10 plus GST for terminal pickups and CA$4.60 plus GST for airport-campus drop-offs. The calculator detects an eligible airport pickup or drop-off from the selected route and adds the relevant fee with GST. A wrong or incomplete airport address may prevent correct detection.
For a taxi trip ending at Edmonton International Airport, the passenger must be charged the lower of the Edmonton metered fare or the official airport-zone flat rate. The correct zone depends on the pickup area. The calculator shows the meter-based estimate because a typed address alone may not reliably identify the official fare-map zone.
When you use the Taxi Fare Calculator Alberta for an airport trip, compare the result with the current official airport information and ask the taxi provider which fare rule will apply.
The final amount shown on a taxi meter can be different from an online estimate because of:
The Taxi Fare Calculator Alberta cannot predict live traffic conditions or the taxi meter’s second-by-second movement. Use the result as a planning guide and check the displayed meter and receipt after the trip.
The estimate includes the selected Calgary or Edmonton starting charge, route distance and user-entered waiting time. It also includes an eligible YYC taxi access fee when the calculator detects the relevant airport route.
The estimate does not include Calgary app-booked prices, rideshare fares, limousine rates or rates for municipalities outside Calgary and Edmonton. It also does not guarantee the applicable Edmonton International Airport zone fare.
You can use the calculator to plan local trips such as:
Enter exact addresses whenever possible. A general place name can select a different entrance or road and change the estimated distance.
No. It is an independent informational tool. It uses published municipal fare inputs for supported taxi trips, but it is not operated by the Government of Alberta, the City of Calgary, the City of Edmonton, an airport or a taxi company.
No. Taxi fare rules are local. This calculator supports Calgary and Edmonton, and it should not be used to estimate rates in another Alberta municipality.
It uses the waiting minutes entered by the user. It cannot see the exact slow-speed and stopped-time record that a live taxi meter will measure during the trip.
No. Rideshare and other private vehicle-for-hire prices can follow different rules. Use the price displayed by the relevant service before confirming that trip.
The estimate adds the published YYC taxi pickup or drop-off access fee with GST when an eligible airport route is correctly detected. Confirm the current fee and selected airport location before travel.
For a taxi trip ending at Edmonton International Airport, the fare must be the lower of the metered amount or the official flat rate for the pickup zone. Check the City of Edmonton airport fare map for the correct zone.
No. The City of Edmonton states that an accessible taxi must charge the same fare as a non-accessible taxi and cannot add an extra fee for accessible service.
Use the calculator above to compare a Calgary or Edmonton route before travelling. Select the correct city and fare basis, enter accurate addresses, and include expected waiting time. The estimate can help with trip planning, while the final fare remains subject to the live meter, route, airport rules and pricing method.
The tool is intended for supported metropolitan Adelaide addresses. Separate country fare rules may apply when a journey ends outside the metropolitan area.
