Estimate an Adelaide metropolitan taxi meter fare using road distance, travel date and time, passenger count and current South Australian tariff inputs. This independent informational calculator does not create or confirm a taxi booking.
The A$2 point-to-point levy is automatically included because this calculator accepts Adelaide metropolitan pickup addresses. Add only charges that genuinely apply. The Adelaide Airport fee applies to pickup from the T1 Airport Terminal Taxi Rank.
Compare Adelaide’s weekday daytime taxi fare calculator with representative day tariffs from major Australian cities. Each example uses the same 8 km journey and 5 minutes of waiting time, making it easier to compare the base fare, distance charge, waiting cost and estimated total.
For Adelaide Tariff 1, the example combines a A$4.00 flagfall, A$2.30 per kilometre and A$47.40 per hour waiting rate. The resulting A$26.35 fare is an illustration only. Airpor
| State or Territory | Representative Day Tariff | Base Fare | 8 km Distance | 5 min Waiting | Example Fare |
|---|---|---|---|---|---|
| New South Wales | Sydney / NSW urban day — $2.61/km | $5.17 | $20.88 | $5.65 | $31.70 |
| Victoria | Melbourne day, Fare Structure 1 — $2.10/km | $5.40 | $16.80 | $3.50 | $25.70 |
| Queensland | Brisbane / South East Queensland day — $2.77/km | $3.80 | $22.16 | $5.20 | $31.16 |
| South Australia | Adelaide metropolitan Tariff 1 — $2.30/km | $4.00 | $18.40 | $3.95 | $26.35 |
| Western Australia | Perth metropolitan Tariff 1 — $2.13/km | $5.40 | $17.04 | $5.08 | $27.52 |
| Tasmania | Hobart Tariff 1 — $2.47/km | $5.40 | $19.76 | $3.74 | $28.90 |
| Australian Capital Territory | Canberra standard weekday day — $2.55/km | $6.15 | $20.40 | $5.32 | $31.87 |
| Northern Territory | Darwin Tariff 1 — $1.95/km | $5.90 | $15.60 | $5.77 | $27.27 |
| Queensland | Cairns / Regional Queensland day — $2.88/km | $3.80 | $23.04 | $5.20 | $32.04 |
The Adelaide taxi fare calculator helps you estimate the cost of a taxi journey within metropolitan Adelaide. Enter your pickup address, destination, expected travel time and passenger group to receive an estimated fare range.
The calculator uses the estimated road distance and South Australia metropolitan taxi tariff inputs. It also considers the applicable flagfall, per-kilometre rate, waiting time and selected extra charges. The result includes an estimated distance, journey duration, fare breakdown and route map.
This is an independent planning tool. It does not operate taxis, accept bookings or provide a guaranteed fare quote. The final amount charged by the taxi meter may be different.
The calculator first estimates the road route between the selected pickup and destination. It then automatically chooses Tariff 1, 2, 3 or 4 using the Adelaide travel date, time and passenger group.
The estimated fare can include:
The calculator displays a fare range rather than one fixed price. This allows for possible differences in route, traffic, waiting time and the final taxi meter reading.
The calculator uses the following metropolitan Adelaide taxi tariff inputs. These figures were reviewed on 19 July 2026 against the current South Australian Government taxi fare information.
| Tariff | Passengers and travel period | Flagfall | Distance rate | Waiting time |
|---|---|---|---|---|
| Tariff 1 | 1 to 4 passengers, Monday to Friday from 6 am to 7 pm | A$4.00 | A$2.30 per km | A$47.40 per hour |
| Tariff 2 | 1 to 4 passengers, nights, weekends or public holidays | A$5.40 | A$2.60 per km | A$47.40 per hour |
| Tariff 3 | 5 or more passengers, Monday to Friday from 6 am to 7 pm | A$5.20 | A$2.90 per km | A$60.50 per hour |
| Tariff 4 | 5 or more passengers, nights, weekends or public holidays | A$7.00 | A$3.40 per km | A$60.50 per hour |
Tariffs 2 and 4 are the higher rates. They apply from 7 pm to 6 am on weekdays and throughout weekends and public holidays.
The calculator checks the selected Adelaide date and time and automatically applies the relevant tariff. If a South Australian public holiday is not detected, the public-holiday option can be selected manually.
For a more detailed explanation, read the Adelaide taxi rates, charges and fare rules.
Enter a complete Adelaide street address, hotel, airport terminal, attraction or suburb. Select the correct address from the suggestion list. You can also use your current location when browser location access is available.
Add the exact drop-off address. A specific street address normally produces a more useful route estimate than entering only a suburb name.
Choose when the taxi journey is expected to begin. The calculator uses Adelaide local time to determine whether a weekday daytime, night, weekend, public-holiday or peak-period fare condition applies.
Select either:
Trips with five or more passengers use Tariff 3 during weekday daytime periods or Tariff 4 at night, on weekends and on public holidays.
Open “More fare options” to add expected waiting time, an airport taxi-rank fee, booking fee, payment surcharge, toll or another permitted charge. Add only the charges that genuinely apply to the journey.
Review the estimated fare range, distance, journey duration, selected tariff, passenger group, fare breakdown and route map.
| Charge | How the calculator handles it |
|---|---|
| Point-to-point transport levy | A$2 is automatically included for supported trips starting in metropolitan Adelaide |
| Peak-period fee | A$2.40 is automatically added between 12:01 am and 5:59 am on a Saturday, Sunday or public holiday |
| Adelaide Airport fee | A$4.75 can be automatically detected or manually selected for pickup from the T1 Airport Terminal Taxi Rank |
| Booking fee | Enter the amount charged by the booking service, if known |
| Waiting time | Enter expected additional stopped or slow-moving minutes |
| Non-cash surcharge | The calculator can estimate the maximum 5% surcharge |
| Tolls or other charges | Enter only a charge that is expected to apply to the route |
The booking fee is not fixed by this calculator because it may depend on the booking service. The South Australian Government states that the maximum surcharge for paying a taxi fare by debit or credit card is 5%.
The South Australian Government currently permits an additional A$2 surcharge for a journey undertaken by an access taxi service from 29 June until 11:59 pm on 2 August 2026, unless it is revoked earlier. This is not a general surcharge for every standard Adelaide taxi trip and is not automatically added by the calculator.
The calculator can estimate a taxi fare from Adelaide Airport to destinations such as Adelaide CBD, North Adelaide, Glenelg, Henley Beach or other supported metropolitan addresses.
When the pickup is recognised as the T1 Airport Terminal Taxi Rank, the calculator can automatically add the A$4.75 airport fee. You can also add or remove this fee manually under “More fare options”.
The fee applies to an eligible pickup from the T1 taxi rank. It should not be added simply because the journey ends at Adelaide Airport. Adelaide Airport currently lists an A$4.75 taxi and rideshare access fee for each exit from its designated ground-transport areas. Adelaide Airport fees and charges
For more route-specific information, see the Adelaide Airport to Adelaide CBD taxi fare guide.
A calculated cab fare is a planning estimate. The final taxi meter amount may change because of:
The calculator cannot reproduce the taxi meter’s second-by-second speed information. If delays are expected, enter additional stopped or slow-moving minutes to create a more suitable cab fare estimate.
This calculator is designed for pickup and destination addresses within its supported metropolitan Adelaide area. It is useful for local city journeys, airport transfers, hotel trips, beach visits and travel between Adelaide suburbs.
Journeys that finish outside the Adelaide metropolitan area may be subject to separate country taxi fare rules. The calculator should not be treated as an exact country-trip fare quote.
You can use the calculator for journeys such as:
| Popular journey | Fare details worth checking |
|---|---|
| Adelaide Airport to Adelaide CBD | Airport fee, levy and selected tariff |
| Adelaide Airport to North Adelaide | Airport fee, road distance and traffic |
| Adelaide Airport to Glenelg | Airport fee and route distance |
| Adelaide CBD to Glenelg Beach | Distance, travel time and weekend tariff |
| Rundle Mall to Glenelg | CBD traffic and journey time |
| Adelaide Oval to Adelaide Airport | Event traffic, waiting time and airport destination |
| Adelaide Railway Station to Glenelg | Exact pickup point and road route |
| Adelaide CBD to Henley Beach | Distance, traffic and travel period |
| Port Adelaide to Adelaide CBD | Route distance and expected delays |
Enter the exact pickup and destination rather than relying on a general route name. This helps the taxi cost calculator produce a more relevant road-distance estimate.
The calculator uses a road route when routing data is available. It then applies the selected Adelaide tariff and applicable fare inputs to calculate a planning range.
If normal road routing is temporarily unavailable, the tool uses an approximate route method and displays a wider fare range. The result may therefore be less precise.
The estimate is not a live cab meter, provider quote or guaranteed final price. For the most useful result:
The cost depends on the selected tariff, road distance, waiting time, passenger count and applicable extra charges. Enter the pickup and destination in the calculator to receive a route-based Adelaide taxi fare estimate.
Yes. The selected Adelaide date, time and passenger group determine whether Tariff 1, 2, 3 or 4 is used. A public-holiday override is also available.
Yes. The calculator automatically adds the A$2 point-to-point transport levy because it supports journeys starting in metropolitan Adelaide.
The A$4.75 fee is automatically added when the pickup is detected as the T1 Airport Terminal Taxi Rank. The airport option can also be changed manually.
Waiting time is included only when additional stopped or slow-moving minutes are entered. The estimated total journey duration is not automatically treated as waiting time.
No. It is an informational taxi cost calculator. It estimates a fare using the route and published fare inputs but cannot reproduce the exact operation of the meter inside a taxi.
Yes. Select “5 or more passengers”. The calculator will use Tariff 3 for weekday daytime travel or Tariff 4 for nights, weekends and public holidays.
No. The calculator does not accept bookings, dispatch vehicles or take payments. It only provides an estimated taxi fare range.
The tool is intended for supported metropolitan Adelaide addresses. Separate country fare rules may apply when a journey ends outside the metropolitan area.
Enter your pickup location, destination, Adelaide travel time and passenger group in the calculator above. Review the route, fare breakdown and estimated taxi fare range before travelling.
